Air conditioners constantly face trouble when they are overrun. One of the most common troubles that AC has is its constant switching off and on. This is mainly caused due to short cycling of the AC compressor. This issue can be fixed by the company you choose for air conditioner installation in Plano.
Reasons For Short Cycling
1. Higher Electricity Usage
The major problem with the short cycling of the air conditioner compressor is the extra usage of electricity. In general means, an AC uses its highest amount of electricity when its compressor’s cooling cycle begins.
AC compressors need more electricity when they start to cool the air. Thus, when there is short cycling, where the compressor runs shorter than 15 minutes and turns off constantly, there is more electricity usage.
2. Additional Strain On AC Compressor
Due to the constant on and off cycle of the compress, the system wears down easily. It causes more strain on the AC over being overrun for long hours. This might limit the life span or duration of the AC compressor and, in turn, the longevity of the AC.
3. Uneven Cooling
When the AC compressor runs shorter than 15 minutes, it will put extra effort into cooling the air. At times, in the long run, the AC might not be powerful enough to cool the air with constant fluctuation. Therefore, there might be uneven air cooling and might also take a longer time to provide the desired results.
Causes For Short Cycling
1. Clogged Air Filter
The air filter plays an important role in the cooling of the air. If the air filter is dirty and clogged with residues, then the system will be under extra pressure to function. This might also cause short cycling. A professional from AC installation Plano TX will successfully figure the problem with the air and clear the debris stuck in the filter.
2. Broken Thermostat
A malfunctioning thermostat will provide a wrong reading of the temperature according to which the ac works. Due to its ghost reading, the compressor will cut short the cooling cycle, and thus, short cycling will be caused.
3. Refrigerant Leak
The refrigerant leak might arise as a serious issue for the AC as it causes trouble for the complete system. The compressor will become overheated if the refrigerant is functioning at low charges. This will, in turn, create the compressor to run in short cycles, and the AC will start and stop randomly.
4. Wrong Size Of AC
The most common issue with short cycling is its overuse. If an AC is of the wrong size for the house, it works too hard and triggers short cycling of AC to cool the room faster. The right company for AC installation in Plano, TX, will help you select the right size of AC for your house.
Looking for an air conditioning installation in Plano, TX? We can help you with all HVAC issues. For more details regarding solving the fluctuation of the AC compressor in your house, contact us at (972) 382 3200.